If you’re planning to hire a plumbing professional, make sure to do some background research before you hire someone. Your plumbing professional should be able to provide you with references, and they should be able to explain exactly what the problem is and how to fix it.
Most homeowners are wary of calling a plumbing service. Many plumbing issues are easily fixed, but identifying which issues require professional help can be difficult.
Below are ten of the most common plumbing issues.
- Water Leaking From Pipes
- Clogged Drains
- Leaky Faucet
- Foul Smell in Sink or Tub
- Blocked Toilet
- Broken Water Heater
- Slow drain
- Multiple Leaking Pipes
- Hot Water Not Working
- Low Water Pressure
How To Fix Common Plumbing Problems?
If you find a leaky tap, you can make a temporary solution by tightening the nut. If the problem persists, you can replace the washer and install new tube fittings.
If you have clogged drains, sometimes you can fix the issue with a plunger. The plunger will push water through the clogged pipe, breaking it up. However, you risk damaging your pipes if you continue plunging. so it’s better to call blocked drain Sydney plumber to unclog your home drain.
You can fix a leaking toilet using a plunger or with an adjustable heater.
Also, you can repair your garbage disposal by turning off the water, putting some ice cubes in, and starting the disposal. If the disposal starts to chug, remove the ice cubes and continue turning the disposal on and off.
Now let’s discuss the 10 Most Common Plumbing Problems in detail
Water Leaking From Pipes
Leaks in-home water pipes occur for various reasons, including corrosion, freezing, and installation. These leaks can waste as much as 30% of the water in your home.
Water leaks come in various forms like dripping taps, leaking water heaters, and leaking toilets. Leaking water pipes can be spotted by listening for the sound of running water. You can look for a damp patch around a pipe, or notice a puddle around the source of the leak.
If you detect a water leak, shut the water off immediately and contact a professional plumber to repair or replace the damaged pipe.
Clogged Drains
Plumbing problems can be simple, such as a clog in the sink or clogged toilets, or they can be more complex, like leaky pipes, damaged faucets, and malfunctioning water heaters.
Clogged Drains are a common plumbing problem that most property owners encounter. They are usually caused by the accumulation of hair, soap residue, food particles, as well as sanitary wipes. They are especially common among owners of older homes. If not cleaned properly, these particles will choke the drain.
Leaky Faucet
A leaky faucet is common in bathroom and kitchen sinks. A leaky faucet is a plumbing problem that can cause the cost of your water bill to go up, damage equipment and appliances, and even cause leaks in the walls and floors.
Most leaky faucets are the result of a problem with the washers or seals, often due to efficient use over time. Older faucets are more prone to these problems. If you think that the leak is because of something deeper and more serious, it would be wise to call an emergency plumber Sydney.
Foul Smell in Sink or Tub
The foul smell in your sink or tub is really annoying, but it isn’t harmful. It can be an effect from food, drink, or even cosmetics, so first, remove the cause. Then, you can use vinegar, baking soda, or hydrogen peroxide to neutralize the odor.
Some plumbers also recommend boiling the sink or tub with boiling water, but this can be a dangerous practice. It is very dangerous for the pipes, and you might cause water damage.
Blocked Toilet
A blocked toilet is caused when the plumber drains water into the bowl; this prevents the water from flushing down. Water then builds up causing the clogged toilet.
The toilet can also become blocked when tree roots grow into the sewer and drain pipe. A clogged toilet is a common plumbing problem. It can be solved by lifting the toilet tank and using a wet/dry vacuum to clear the toilet.
Broken Water Heater
Leaks in water heaters are common in older units. The leak can cause water damage to your home, resulting in expensive repairs. A corrosion control additive can protect your water heater from corrosion.
Although water heaters generally last 10-15 years, older units can leak due to poor design or age. The corrosion control additive, when mixed with the water in the tank, reacts with the calcium in the water and prevents it from forming rust.
Slow drain
A slow drain is a frustrating problem. It can be disgusting, frustrating, and annoying. With your sink or bathtub draining slowly, you can’t do anything. You have to leave everything as it is and let the sink or tub drain on its own.
The problem is that drains don’t flush uniformly. Some drains flush cleaner than others. Depending on the interior design of your drain, it may or may not flush out completely.
This is where you can consult a plumber to get a proper diagnosis. Drain cleaners will completely clog your drain and you’ll suffer a backed up sink or tub.
If you’re not handy, the best option is to call a plumber, even if you must do it yourself. Drain cleaners are dangerous if improperly used.
Multiple Leaking Pipes
Leaks in pipes have caused floods in many areas. To avoid such damage, it’s important to keep your home’s pipes in pristine condition. Flawed pipes may be repaired, but you must call a professional plumber to look at the problem.
Pipes that leak in two places at the same time are more likely to fail to result in flooding. While an inspection by a professional may save you some money, it will cost you a lot more in water damage. If you notice cracks or leaks, call a plumber as soon as possible.
Hot Water Not Working
Your hot water tank is the heart of your plumbing system. It heats the water used to melt your ice, clean the dishes and flush the toilet. Without a hot water tank, your home would quickly turn cold and utilities would be disrupted.
When your hot water tank fails, you need to get it fixed as soon as possible to keep your home running smoothly. However, before you turn to a professional, there are several things you can do to troubleshoot your hot water tank.
Low Water Pressure
Low water pressure can be irritating and frustrating. It can leave your clothes damp, or even worse, it can leave stains. In addition to your washing machine, water pressure is also an important aspect when it comes to your shower or bath.
There are a couple of reasons why your water pressure could be low. Perhaps there is a leak somewhere in your water system. The cause could be a faulty pressure-reducing valve, a frozen pipe, or a leak in the supply line.
With a little research, homeowners can save themselves time and money. We hope this article has helped you avoid calling a plumbing service unnecessarily. Let us know in the comments if you have any plumbing questions. We’d be happy to help!
